Debian 10 Buster with Zoneminder 1.36.x from ZM Repo

Notice: These procedure are for a new install of Zoneminder 1.34.x on Debian 10 (Buster). If you are doing an upgrade I strongly recommend you check the Zoneminder-1.34 Forum area for recommendations from others.

Debian 10 Buster with Zoneminder 1.34.x from the ZM Master Repo

This install procedure was developed to use the Debian package developed by iconnor. This is from the 1.34 release version of Zoneminder.

This procedure will work on a Raspberry Pi 3b+ and possibly other devices.

To begin, install Debian 10 (Buster) along with Apache2, PHP and your favorite database (Mariadb recommended). See: https://www.digitalocean.com/community/tutorials/how-to-install-linux-apache-mariadb-php-lamp-stack-on-debian-10

Add the repo

sudo nano /etc/apt/sources.list

Add the following line to the end of the file

deb https://zmrepo.zoneminder.com/debian/release-1.34 buster/

CTRL+o then [Enter] to save

CTRL+x to exit

Install the following and retrieve the key from the repro

sudo apt install apt-transport-https gnupg

wget -O - https://zmrepo.zoneminder.com/debian/archive-keyring.gpg | sudo apt-key add -

Important - Make sure the above "wget" process completes without error! If it does not complete you will not get the most recent Zoneminder version this procedure is written for.

sudo apt update

Install Zoneminder

sudo apt install zoneminder

Create a new user if you plan to use local (USB or capture card) cameras.

adduser www-data video

Enable and start Zoneminder

sudo systemctl enable zoneminder.service
sudo systemctl start zoneminder 

Enable Apache Modules

sudo a2enconf zoneminder
sudo a2enmod rewrite

Restart Apache

sudo service apache2 reload

Access Zoneminder (http://ip-address/zm) and remember to set your timezone in Zoneminder/Options

Zoneminder 1.34.x on Buster LEMP (NGNIX, Mariadb, PHP)

This procedure will work on a Raspberry Pi 3b+ and possibly other devices.

Thanks to "terdinglage" for the input to get this to work!

Start with a basic Buster install. You can use a server or desktop install. Do not install LAMP!

Become root

sudo su

Install Ngnix, Mariadb and PHP components

apt install nginx mariadb-server php-fpm php-mysql fcgiwrap

Secure the Mariadb server

mysql_secure_installation

Restart Mariadb

systemctl restart mysql

Edit the php.ini file

nano /etc/php/7.3/fpm/php.ini

Locate (Ctrl+w) cgi.fix_pathinfo=1 and change to

cgi.fix_pathinfo=0

Remember to remove the leading ;

Ctrl+o Enter to save

CTRL+x to exit

Restart php-fpm

systemctl restart php7.3-fpm

Add the repro

sudo nano /etc/apt/sources.list

Add the following line to the end of the file

deb https://zmrepo.zoneminder.com/debian/release-1.34 buster/

CTRL+o then [Enter] to save

CTRL+x to exit

Install the following and retrieve the key from the repro

sudo apt install apt-transport-https gnupg

wget -O - https://zmrepo.zoneminder.com/debian/archive-keyring.gpg | sudo apt-key add -

Important - Make sure the above "wget" process completes without error! If it does not complete you will not get the most recent Zoneminder version this procedure is written for.

sudo apt update

Install Zoneminder

apt install zoneminder

Create a new user if you plan to use local (USB or capture card) cameras.

adduser www-data video

Fix Permissions

chown -R www-data:www-data /usr/share/zoneminder/

Change the ZM_PATH_ZMS in the 01-system-paths.conf file to /cgi-bin/nph-zms by dropping the /zm/

nano /etc/zm/conf.d/01-system-paths.conf

Ctrl+o Enter to save

CTRL+x to exit

Enable and start Zoneminder

systemctl enable zoneminder

service zoneminder start

Edit the Ngnix default configuration.

nano /etc/nginx/sites-available/default

Locate the line "index index.html index.htm index.nginx-debian.html;" and add index.php

index index.php index.html index.htm index.nginx-debian.html;

In the "server" section after listen [::] :80 default_Server; add

include /etc/nginx/zoneminder.conf;

Ctrl+o Enter to save

CTRL+x to exit

Create a Zoneminder conf file

nano /etc/nginx/zoneminder.conf

Enter the following into the zoneminder.conf file (This file was improved by databoy2k)

location /cgi-bin {
auth_basic off;
        alias /usr/lib/zoneminder/cgi-bin;     
        include fastcgi_params;
        fastcgi_param SCRIPT_FILENAME $request_filename;
        fastcgi_param HTTP_PROXY "";
        fastcgi_pass unix:/var/run/fcgiwrap.socket;
}
location /zm/cache {
auth_basic off;
        alias /var/cache/zoneminder/cache;
}
location ~ /zm/api/(css|img|ico) {
auth_basic off;
        rewrite ^/zm/api(.+)$ /api/app/webroot/$1 break;
        try_files $uri $uri/ =404;
}
location /zm {
auth_basic off;
        alias /usr/share/zoneminder/www;
        try_files $uri $uri/ /index.php?$args =404;    
        location /zm/api {
auth_basic off;
                rewrite ^/zm/api(.+)$ /zm/api/app/webroot/index.php?p=$1 last;
         }
                location ~ \.php$ {
                auth_basic off;
                        include fastcgi_params;
                        fastcgi_param SCRIPT_FILENAME $request_filename;
                        fastcgi_param HTTP_PROXY "";
                fastcgi_index index.php;
                        fastcgi_pass unix:/var/run/php/php7.3-fpm.sock;
        }
    }

Ctrl+o Enter to save

CTRL+x to exit

Restart Ngnix

service nginx restart

Note: If Nginx gives you an error on restart go back one step and re-enter include /etc/ngnix/zoneminder.conf;

If it does not exist create

nano /etc/default/fcgiwrap

and insert (with the number of children -c equal to the number of cameras)

DAEMON_OPTS=-c 10

then restart the fcgiwrap service.

systemctl restart fcgiwrap

Open Zoneminder and under Options set your timezone.