Axis

Error creating thumbnail: Unable to save thumbnail to destination

ZoneMinder will work well with just about any Axis camera, including the 205, 206, 207, 209, 210 and 211 ranges. It will also work with the 213 and 2130 cameras and support their PTZ functions through the web interface.

Please note that early 207's has some hardware issues. See this thread in the forum for details. Also note that the 2100 has been discontinued by Axis and no longer supported, possibly due to hardware related problems. It's noted in the forums that the camera sends the pictures it captures somewhat diced up.

How to Offload the Motion to cameras AxisMotionDetection

AXIS 2110

/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240

AXIS 207W

<User>:<Password>@<IP Address>/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240

AXIS P33XX-V/VE

<User>:<Password>@<IP Address>/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240 or <User>:<Password>@<IP Address>/mjpg/video.mjpg

AXIS 213PTZ

The axis 213PTZ works perfectly. Use the folowing settings:

SOURCE
Remote Protocol: RTSP
Remote Method: RTP/RTSP
Remote Host Name: <USER>:<PASS>@<CAM IP/HOSTNAME>
Remote Host Port: 554
Remote Host Path: /mpeg4/media.amp

CONTROL
Controllable: Yes
Control Type: Axis API v2
Control Address: <USER>:<PASS>@<CAM IP/HOSTNAME>

The resolution must match the one especified in the camera settings. Resolutions up to CIF will work without any problems but 2CIF and 4CIF will need the shared memory tweak (lean more at the FAQ)

The AxisMotionDetection trick works quite well with this camera.

The Max FPS option of zoneminder introduces very big latency, so I use the option of the camera for limiting the FPS.

This was tested with zoneminder 1.24.2 running on Gentoo stable