Linksys

WVC-210 PTZ

remote host path = /img/video.mjpeg

Atap Fiberglass | Tangki Fiberglass

WVC2300 / PVC2300

A few options for these cameras:

• Base hit uses still image snapshots:
  • Remote Host Name: user:password@ip.ad.dr.ess
  • Remote Host Path: img/snapshot.cgi?size=3&quality=1
    • size=1-3 (160x120, 320x240, 640x480)
    • quality=1-5(very high - very low)
• Even better solution is to use pushed jpegs:
  • Remote Host Name: user:password@ip.ad.dr.ess
  • Remote Host Path: img/mjpeg.jpg
  • Use the web administration UI for the camera to set size, quality and framerate throttling
• Would like to use ffmpeg, however this seems to be giving problems - partial image scans etc
  • Source Path: http://user:password@ip.ad.dr.ess/img/video.asf
  • Seems to use size and quality settings from the administration website
• What doesnt work
  • img/video.mjpeg (and other similar urls). Generally barfs on zm_remote_camera_http.cpp:134, and I cant be bothered debugging it.
• Other notes
  • See NetcamMjpegStreamDumps for information from the 'motion' application (scroll down to Linksys WVC54G which gave me some hints)

WVC54GC

• Source Type: ffmpeg
• Source Path: http://##.##.##.##/img/mjpeg.cgi